How to Set Up Your Wi-Fi Timer (Sonoff) with eWeLink

This guide helps you pair your timer, activate Inching mode, and set up scheduled feeding.

Step 1: Pairing the Device

• Plug in your Wi-Fi timer. If the LED is not blinking fast, hold the button for 5 seconds to enter pairing mode.
• Open the eWeLink App (available on Android and iOS).
• Tap the “+” button and choose Quick Pairing (Touch).
• Connect to your 2.4GHz Wi-Fi network and enter your password.
• Wait for the device to pair, then name it (e.g., “Feeder Timer”).

Step 2: Enable Inching Mode

• In the eWeLink app, tap on your connected device.
• Click the Settings (gear icon) in the top right corner.
• Scroll to find and enable Inching.
• Set the inching time (e.g., 1–3 seconds).
• Save the configuration. The timer will now turn off automatically after activation.

Step 3: Schedule Automatic Feeding

• Open your device and tap on “Schedule”.
• Tap “+” to add a new schedule.
• Select the time you want the feeder to trigger (e.g., 07:00 AM).
• Set it to repeat daily or on selected days.
• Choose ON as the action — Inching will turn it off automatically.
• You can add multiple times per day (morning, afternoon, etc.).

Tips

• Make sure your Wi-Fi signal is strong where the device is installed.
• If pairing fails, reset and try again by holding the button for 5–7 seconds.
• Keep your eWeLink app and firmware up to date.

Need help? Contact us at support@kingoffeeders.com

How to Set Up Your Wi-Fi Timer (Sonoff) with eWeLink

This guide helps you pair your timer, activate Inching mode, and set up scheduled feeding.

Alternative Pairing: Compatible Pairing Mode (AP Mode)

• Hold the button for about 5–7 seconds until the LED blinks slowly (once every 2 seconds).
• Open the eWeLink app and tap the “+” button.
• Select Compatible Pairing (AP Mode) from the bottom.
• Enter your 2.4GHz Wi-Fi name and password and tap "Next".
• Connect to the temporary Wi-Fi that starts with Itead-XXXXX in your phone's Wi-Fi settings.
• Return to the app to finish pairing. It may take up to 2 minutes.
• Once complete, name your device and proceed with setup.

Step 1: Pairing the Device (Quick Pairing)

• Plug in your Wi-Fi timer. If the LED is not blinking fast, hold the button for 5 seconds to enter pairing mode.
• Open the eWeLink App (available on Android and iOS).
• Tap the “+” button and choose Quick Pairing (Touch).
• Connect to your 2.4GHz Wi-Fi network and enter your password.
• Wait for the device to pair, then name it (e.g., “Feeder Timer”).

Step 2: Enable Inching Mode

• In the eWeLink app, tap on your connected device.
• Click the Settings (gear icon) in the top right corner.
• Scroll to find and enable Inching.
• Set the inching time (e.g., 1–3 seconds).
• Save the configuration. The timer will now turn off automatically after activation.

Step 3: Schedule Automatic Feeding

• Open your device and tap on “Schedule”.
• Tap “+” to add a new schedule.
• Select the time you want the feeder to trigger (e.g., 07:00 AM).
• Set it to repeat daily or on selected days.
• Choose ON as the action — Inching will turn it off automatically.
• You can add multiple times per day (morning, afternoon, etc.).

Tips

• Make sure your Wi-Fi signal is strong where the device is installed.
• If pairing fails, reset and try again using either Quick Pairing or AP Mode.
• Keep your eWeLink app and firmware up to date.

Need help? Contact us at support@kingoffeeders.com

How to Set Up Your Wi-Fi Timer with Smart Life

Step-by-step guide to pair your smart timer, enable pulse (inching), and schedule feeding times.

Step 1: Install the Smart Life App

• Download Smart Life – Smart Living from the Google Play Store or Apple App Store.

Step 2: Prepare the Device for Pairing

• Plug in the Wi-Fi timer.
• Press and hold the button for about 5–6 seconds until the LED starts blinking rapidly (EZ Mode).
• If it blinks slowly, switch to AP Mode during setup in the app.

Step 3: Pair the Device

• Open the Smart Life app and tap the “+” icon or “Add Device”.
• Select “Socket (Wi-Fi)” or “Switch”, depending on your device.
• Connect to a 2.4GHz Wi-Fi network and enter your password.
• Confirm the LED is blinking and tap “Next”.
• Wait for the pairing process to complete, then give your device a name (e.g., “Feeder Timer”).
• If pairing fails, try again using AP Mode by tapping “EZ Mode” in the top corner and switching modes.

Step 4: Enable Pulse (Inching) Mode

• Go to your device in the Smart Life app.
• Tap the settings gear icon or pencil icon.
• Select “Relay Status” or “Inching Settings” depending on your firmware version.
• Enable Pulse Mode (or “Inching”).
• Set the time (e.g., 1 second).
• Tap Save to confirm. Now, the feeder will activate only briefly when triggered.

Step 5: Schedule Feeding Times

• From the device screen, tap “Timer” or “Schedule”.
• Tap the “+” icon to create a new timer.
• Set the time and select the days of the week (e.g., every day at 7:00 AM).
• Choose the action: Switch ON.
• Save. The inching mode will turn it OFF automatically after triggering.
• You can create multiple schedules (morning, evening, etc.).

Tips

• Ensure your phone is connected to a 2.4GHz network (not 5GHz).
• Place your device in a location with strong Wi-Fi signal.
• Use AP Mode if EZ Mode fails to connect.
• Update the Smart Life app and your device firmware regularly.

Need Help?

Contact us at support@kingoffeeders.com